Reproduction Tags & Floats




DEW_Marine_Repo_Tag_001s.jpg (32362 bytes)   Ziggy06s.jpg (35572 bytes)   DMCSC_Sandow_Tag_SN_2s.jpg (52186 bytes)   DMCSC_SANDOW_Stationary_Tag_001s.jpg (72657 bytes)      

All tags are new reprodution tags and are so close to the original tags that you can not tell the difference other then they look new.  $32 U.S. dollars each includes first class shipping with in the USA. Please email what style tag you want with quantity, your name & address. Payment U.S. post office money order, personal check or cash. No PayPal.

mazak@rocketmail.com
________________________________________________________________________________________________

Peterson_Fuel_Feeder_Float_2m.jpg (87312 bytes)  Peterson_Fuel_Feeder_Float_5m.jpg (44397 bytes)  Peterson_Fuel_Feeder_Float_7m.jpg (25841 bytes)  Peterson_Fuel_Feeder_Float_3m.jpg (72417 bytes) 

Nitrophyl float & brass insert tube now available for the early style two piece Peterson fuel feeder. These nitrophyl float's require no sealing, are ethanol resistant & last forever. The brass insert tube is designed to fit on the original stock 1/8" diameter float rod with a .035 wide groove. Floats are $28.00 each, brass insert tube, washer & clip are $10.00 each. This price includes packaging & first class shipping with in the USA.

You can use your old brass tube & clip if you like, but you will have to be very careful sodering or you can damage the float from to much heat. Nytrophyl is not as forgiving as Cork when it comes to heat. Using a business card in between the float & brass you are sodering helps insulate from the heat. The new brass tube & clip (pictured above) requires no sodering on your part.  

_________________________________________________________________________________________________

DEW_Fuel_Feeder_Float_3s.jpg (88128 bytes)  DEW_Fuel_Feeder_Float_Brass_Threaded_Insert_4m.jpg (74897 bytes)  DEW_Fuel_Feeder_Float_5s.jpg (86914 bytes)

Nitrophyl float & brass threaded insert tube now available for late style one piece DEW fuel feeder. These nitrophyl float's require no sealing, are ethanol resistant & last forever. The brass insert tube is an exact copy of the original and has a 6-32 internal thread. Floats are $28.00 each, brass insert tubes are $10.00 each. This price includes the cost of packaging and first class shipping with in the USA.

You can use your old brass insert tube if you like but you will have to clean all the old cork & glue off of it and bond it in the new float with glue. I use cyanoacrylate (Super Glue) but you have to be fast about inserting the brass tube all the way to the proper depth otherwise you might get it stuck halfway. If your worried about getting the brass tube stuck halfway you can put your container of superglue in the freezer or fridge just long enough to get it cold and this will help slow down the bonding time a little.

_______________________________________________________________________________________________

From time to time I may have some used Detroit parts, Such as governor parts, timer parts, carbs, mixers, etc..
If you have Detroit parts you no longer need please contact me & I may be interested in purchasing them or trading.

mazak@rocketmail.com

No used parts at this time, sorry. Check back later.

 

 

Main Menu